国际标准化上海协作平台

您的位置：首页 - 成员活动

成员活动

ISO/TC70 2016年第3季度工作动态

1 参加国际标准投票工作情况

1 ISO/TC 70 SR ISO 7967-2:2010 (Ed 2)
Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 2: Main running gear
往复式内燃机零部件和系统术语第2部分：主要运动件 2015-10-15 2016-03-15
2 ISO/TC 70/SC 8 CD ISO/CD 8178-1
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
往复式内燃机排放测量第1部分：气体和颗粒排放物的试验台测量 2015-11-14 2016-01-31
3 ISO/TC 70/SC 8 CD ISO/CD 8178-4
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Steady-state test cycles for different engine applications
往复式内燃机排放测量第4部分：不同用途发动机的试验循环 2015-11-14 2016-01-31
4 ISO/TC 70/SC7 FDIS ISO/FDIS 4548-14
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings
内燃机全流式机油滤清器实验方法第14部分：复合材料滤清器外壳的冷起动模拟和液压脉冲耐久试验 2015-11-23 2016-01-23
5 ISO/TC 70 CIB ISO/TC70 Resolution 354
ISO/TC70第354条决议，修订ISO8528-5:2013 Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets 2016-01-05 2016-02-05
6 ISO/TC 70 SR ISO/TC70 Resolution 355
ISO/TC70第355条决议，修订ISO8528-6:2005 Reciprocating internal combustion engine driven alternating current generating sets Part 6: Test methods 2016-01-05 2016-02-05
7 ISO/TC 70/SC7 DIS ISO/DIS 4548-12
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
内燃机全流式机油滤清器试验方法第12部分：采用颗粒计数法测定滤清效率和容灰量 2016-01-20 2016-04-20
8 ISO/TC 70/SC7 CIB ISO7747 and ISO6415 from ISO/TC22/SC34 into ISO/TC70/SC7
将ISO7747 and ISO6415从ISO/TC22/SC34移至ISO/TC70/SC7 2016-03-04 2016-05-04
9 ISO/TC 70 CIB Enquiry to establish a liaison with ISO/TC43/SC1
建立与ISO/TC43/SC1的联络关系 2016-03-15 2016-04-15
10 ISO/TC 70 CIB Propose to disband TC70/WG15 and Call for experts for JWG16
建议解散ISO/TC70/WG15，召集ISO/TC70/JWG16专家 2016-03-22 2016-04-22
11 ISO/TC 70/SC7 SR ISO 4548-9:2008
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 9: Inlet and outlet anti-drain valve tests
内燃机全流式机油滤清器试验方法第9部分：进、出口止回阀试验 2016-04-15 2016-09-15
12 ISO/TC 70/SC8 DIS ISO/DIS 8178-1
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
往复式内燃机排放测量第1部分：气体和颗粒排放物的试验台测量 2016-06-08 2016-08-30
13 ISO/TC 70/SC8 DIS ISO/DIS 8178-4
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Steady-state test cycles for different engine applications
往复式内燃机排放测量第4部分：不同用途发动机的试验循环 2016-07-21 2016-10-12
14 ISO/TC 70 CD ISO/NP 2710-1
Reciprocating internal combustion engines -- Vocabulary -- Part 1: Terms for engine design and operation
往复式内燃机词汇第1部分：发动机设计和运行术语 2016-07-28 2016-09-22
15 ISO/TC 70 DIS ISO/DIS 8528-7
Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design
往复式内燃机驱动的交流发电机组第7部分：用于技术条件和设计的技术说明 2016-07-28 2016-10-19
16 ISO/TC 70 DIS ISO/DIS 8528-9
Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations 往复式内燃机驱动的交流发电机组第9部分：机械振动的测量和评价 2016-07-28 2016-10-19
17 ISO/TC 70 FDIS ISO/FDIS15550
Internal combustion engines -- Determination and method for the measurement of engine power -- General requirements
内燃机发动机功率的确定和测量方法一般要求 2016-08-02 2016-09-27
18 ISO/TC 70 CIB ISO/TC70 N0849 Proposal to revise ISO 6798:1995 Part 1
2016-08-19 2016-09-19
19 ISO/TC 70 CIB ISO/TC70 N0850 Proposal to revise ISO 6798:1995 Part 2 2016-08-19 2016-09-19

2正在进行的制修订项目

1 ISO/NP 2710-1
Reciprocating internal combustion engines -- Vocabulary -- Part 1: Terms for engine design and operation
往复式内燃机词汇第1部分：发动机设计和运行术语日本 TC70/WG2
Hiroshi Okada
2 ISO/WD 8528-1
Reciprocating internal combustion engine driven alternating current generating sets -- Part 1: Application, ratings and performance
往复式内燃机驱动的交流发电机组第1部分：用途、定额和性能法国 TC70/WG14
Jean-Michel GEILLER
3 ISO/NP 8528-5
Reciprocating internal combustion engine driven alternating current generating sets -- Part 5: Generating sets
往复式内燃机驱动的交流发电机组第5部分发电机组法国 TC70/WG10
Fraboulet, Bertrand M.
4 ISO/NP 8528-6
Reciprocating internal combustion engine driven alternating current generating sets -- Part 6: Test methods
往复式内燃机驱动的交流发电机组第6部分试验方法法国 TC70/WG10
Fraboulet, Bertrand M.
5 ISO/DIS 8528-7
Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design
往复式内燃机驱动的交流发电机组第7部分：用于技术条件和设计的技术说明中国 TC/70/JWG16
李学明
6 ISO/DIS 8528-9
Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations 往复式内燃机驱动的交流发电机组第9部分：机械振动的测量和评价中国 TC/70/JWG16
李学明
7 ISO/FDIS15550
Internal combustion engines -- Determination and method for the measurement of engine power -- General requirements
内燃机发动机功率的确定和测量方法一般要求中国 ISO/TC70
计维斌
8 ISO/NP 4548-5
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 5: Test for cold start simulation and hydraulic pulse durability
内燃机全流式机油滤清器试验方法第5部分：冷起动模拟和液压脉冲耐久试验英国 ISO/TC70/SC7
Mr. Arens, Daniel
9 ISO/DIS 4548-12
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
内燃机全流式机油滤清器试验方法第12部分：采用颗粒计数法测定滤清效率和容灰量英国 ISO/TC70/SC7
Petillon, Nicolas M.
10 ISO/DIS 8178-1
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
往复式内燃机排放测量第1部分：气体和颗粒排放物的试验台测量德国 ISO/TC70/SC8/WG6
Martin Nitsche
11 ISO/DIS 8178-4
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Steady-state test cycles for different engine applications
往复式内燃机排放测量第4部分：不同用途发动机的试验循环德国 ISO/TC70/SC8/WG6
Martin Nitsche
12 ISO/NP 8178-6
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 6: Report of measuring results and test
往复式内燃机排放测量第6部分：测量结果和试验报告中国 ISO/TC70/SC8/WG6
计维斌

3．中国专家提出的噪声标准修订提案已开始投票

　在ISO/TC70 2015年年会上，上海内燃机研究所专家袁卫平教授提出修订ISO6798:1995《往复式内燃机辐射的空气噪声测量工程法及简易法》中的工程法与简易法，增加半消声室精密法和使用标准声源简易法这一系列标准的提案，具体名称如下：
　　《往复式内燃机声压法声功率级的测定第1部分：工程法》；
　　《往复式内燃机声压法声功率级的测定第2部分：简易法》；
　　《往复式内燃机声压法声功率级的测定第3部分：半消声室精密法》；
　　《往复式内燃机声压法声功率级的测定第4部分：使用标准声源简易法》。
　　注：其中第1和2部分为修订标准，第3和4部分为新项目提案
　　根据时间安排，上海内燃机研究所于2016年4月向国家标准化管理委员会申请第1部分和第2部分的修订工作，并计划于2018年申请第3和4部分的重新起草工作。
　　国标委于2015年5月31日批准这两项国际标准修订提案，并提交至ISO/TC70秘书处。
根据ISO/IEC 导则，秘书处于8月19日发起针对这两项提案的委员会内部投票（CIB），投票截止日期是9月19日,投票结果为一致通过。